AN762-180 180 WATT HF AMP COMPONENT SET The AN762-180 amplifier is designed for mobile operations. The amplifier operates over the 1.6 to 30 MHZ frequency band with a 13.6 Vdc power supply...
RF400 TRANSFORMER is intended for input, output and interstage impedance matching applications, primarily in solid-state, push-pull amplifiers. The RF400 transformercan handle a maximum power...
600W EB104 HF AMP COMPONENT SET This push-pull/parallel circuit produces a power output of 600 watts across the 2 to 30 MHz band using four RF devices without the added loss and cost of power...
FLEXIBLE COAX 10.7 OHM IMPEDANCE Features: Each conductor is made of stranded silver-plated copper Type E extruded TFE "Teflon"* insulation Sintered wrapped white "Teflon"* tape Temperature...
FLEXIBLE COAX 17 OHM IMPEDANCE Features: Each conductor is made of stranded silver-plated copper Type E extruded TFE "Teflon"* insulation Sintered wrapped white "Teflon"* tape Temperature...
AR305 300 HF AMP COMPONENT SET This amplifier design covers frequencies from HF to VHF with a power output level of 300 watts using RF power MOSFETs. The MRF151G used in this design is considered as...
These TUI transformers are intended for input impedance matching applications in the 2-300 MHz frequency range up to 1KW. The winding material is semi-rigid coax cable. The primary and secondary...
